What fluorescent lamps can the Aladdin LED lamp replace?
Does the Aladdin LED lamp run on line voltage or require a ballast?
Over what voltage range does the Aladdin LED T8 lamp operate?
Is light output constant over this range?
Why are the lumen levels lower for the Aladdin LED lamps verses the fluorescent lamp it replaces?
Based on "effective lumens", what are the equivalent Aladdin LED lamps and fluorescent lamps?
What is the operating temperature range of the Aladdin LED lamps?
What is the material and rating of the Aladdin LED tube?
Do Aladdin LED lamps need to be recycled? Do they contain heavy metals?
Are the Aladdin LED lamps ETL certified? For which UL And CSA standards?
Are the Aladdin LED lamps LM-79 tested?
What is the expected current for the Aladdin LED lamps?
How do you retrofit an Aladdin LED lamp into an existing fixture?
What is the warranty of an Aladdin LED lamp?
What is the life of Aladdin LED lamp? How is it calculated?
Will Aladdin LED Lamps Carry the Energy Facts Label?
Question: What fluorescent lamps can the Aladdin LED lamp replace?
Answer: Any four foot, bi-pin, T8 or T12 fluorescent lamp can be replaced with the Aladdin T8 LED four foot lamp.
Answer: The Aladdin LED T8 lamps run on line voltage ranging from 85VAC to 277VAC and do not require a ballast, since the power supply is built into the lamp.
Answer: 85VAC to 277VAC.
Answer: Yes, the light output is constant over the 85VAC to 277VAC range.
Answer: All the light of the Aladdin LED T8 lamp is produced within an arc of 120 degrees that is 95% efficient in directing light towards the surface to be illuminated. On the other hand, a fluorescent tube produces light over a circle of 360 degrees and may only be 65% efficient in delivering light to the work area, since 35% can be lost in the fixture through absorption. Therefore, an Aladdin LED T8 lamp can produce less total lumens and still be much more efficient in delivering “effective lumens” or usable light to the area to be illuminated.
Answer: Aladdin LED T8 lamps are available in both clear and frosted versions and 4200 and 5500 Kelvin. The comparison to fluorescent tubes is as follows:
Aladdin LED T8, Standard Grade (300 LEDs) Frosted replaces 32 to 36 Watt Fluorescent.
Aladdin LED T8, Standard Grade (300 LEDs) Clear replaces a 40 Watt Fluorescent.
Answer: Aladdin LED T8 lamps are designed to operate in temperatures from -20 degrees to +70 degrees centigrade.
Answer: The Aladdin LED tube is a V1 rated, polycarbonate material. V0 Rated tubes are also available.
Answer: Aladdin LED T8 lamps do not contain any heavy metals or toxic materials and while not required, they can be recycled.
Answer: All Aladdin LED T8 lamps are ETL certified and meet the following UL Standards: UL 1993, UL Subject 8750 and UL 1598B and CSA Certs: C22.2 #84, TILB-36B, TILB-64..
Answer: All Aladdin LED T8 lamps are LM-79 tested by a caliper certified lab.
Answer: Aladdin LED T8 tubes draw approximately. 220 Amps.
Answer: By wiring out or removing the existing ballast and reconnecting the wires. Please see wiring instructions provided with each Aladdin LED T8 lamp. Also, please view wiring instructions on our website by clicking on How To Install Aladdin LED T8 Replacement Tubes.
Answer: 5 years.